MATRIX PROJECTS

MULTI-TANKWAGON LOADING AND INSPECTION PLATFORM

Apr 01, 2012

Matrix Engineering has been involved with many operator safety improvement projects over the years. One in particular was the mechanical and electrical design for the tank-wagon inspection platform installed at ISP in Calvert City, KY. We provided ISP with a total project cost analysis which allowed them to accurately budget the project. The new platform design consisted of two lockable fold-out platforms which were movable along the platform and were able to be centered above each tank-wagon. From there, operators had the ability to release the fold-out platforms to the desired tank-wagon for a safer means of inspection. Steam mixing stations and nitrogen purge lines were installed for each tank-wagon location. Platform area lighting was also incorporated within the platform design to ensure all walking surfaces were well lit for plant operator safety.

  • Slide title

    Write your caption here
    Button

  • Slide title

    Write your caption here
    Button

More Projects & News

MATRIX TUGMONITOR is a high end engine monitoring and alarm system that is simple to add alarms to.

NEW 6000HP TOWBOAT BUILD - ENGINE MONITORING SYSTEM

26 Jan, 2024
Matrix provides a PLC based TUGMONITOR for a 6000HP TWIN ENGINE NEW BUILD. Communicates seamlessly via ethernet with GE Engines.
LUMP DISSOLVE FEEDER

P2O5 LUMP DISSOLVE FEEDER

01 Dec, 2021
Matrix provided conceptual and hard mechanical design of a heavy duty screw feeder for metering phosphorus pentoxide (crystallized phosphoric acid) into a dissolve tank. Due to the hot reaction during hydration in the tank (resulting into very hot phosphoric acid) the variable speed screw feeder consisted of a 316L S/S 12 inch diameter auger and 1/2 inch thick trough. A special dump hopper with automated closing lid was designed with a large grated opening and bypass chute at the inlet of the feeder. Very special design considerations were made for protecting the conveyor seals and bearings from making contact with the hot acid. Our design allowed the acid crystals or hot liquid to fall out into an isolated gap and into the tank before it challenged the seal. This was a highly successful design has virtually eliminated the huge stock piles of drummed feedback material that accumulated due to the inability to dissolve the crystallized acid safely.

MATRIX AND THE SHARK TANK EXPERIENCE

By Darren Jarvis • 03 Jan, 2021
Matrix Industrial Systems was proud to work in conjunction with AC Marine in designing and supplying critical systems for Georgia Aquarium's newest venue to experience sharks directly with the grand opening of their 1.2MM gallon Shark Tank. This attraction allows you to submerge into the tank within a shark cage and begin an underwater journey traversing the pool as it is suspended and moved by a hoist/monorail system. Breathing air for the participants is supplied through an umbilical tethered to the cage and connected to a specialized Breathing Air Control System (BACS). Matrix supplied and installed this system with its umbilical as a turnkey project. Matrix and AC Marine were proud to be guinea pigs (or should I say SHARK BAIT) on the maiden voyage!
Show More
Share by: