MATRIX PROJECTS
PHOSPHORIC ACID SCRUBBER,
Jun 01, 2001
Matrix Engineering provided the concept drawings, budget estimates, structural, mechanical, and electrical detailed engineering necessary to install a venturi/flooded elbow scrubber system with a mist eliminator at the Nashville, TN plant. A new multi-level structure was used to support and access the new scrubber and mist eliminator. This structure adjoined an existing structure and tank that were utilized for the project. The project also included a drum dumping and a lump feeding system as well as a tote-bin wash-down station. These handling projects were very difficult due to the extreme corrosive nature of the product. Besides structural design and detail drawings, we also provided vessel arrangement, ductwork layout, piping design and details, as well as electrical.
More Projects & News
Matrix provides a PLC based TUGMONITOR for a 6000HP TWIN ENGINE NEW BUILD. Communicates seamlessly via ethernet with GE Engines.
Matrix provided conceptual and hard mechanical design of a heavy duty screw feeder for metering phosphorus pentoxide (crystallized phosphoric acid) into a dissolve tank. Due to the hot reaction during hydration in the tank (resulting into very hot phosphoric acid) the variable speed screw feeder consisted of a 316L S/S 12 inch diameter auger and 1/2 inch thick trough. A special dump hopper with automated closing lid was designed with a large grated opening and bypass chute at the inlet of the feeder. Very special design considerations were made for protecting the conveyor seals and bearings from making contact with the hot acid. Our design allowed the acid crystals or hot liquid to fall out into an isolated gap and into the tank before it challenged the seal. This was a highly successful design has virtually eliminated the huge stock piles of drummed feedback material that accumulated due to the inability to dissolve the crystallized acid safely.
Matrix Industrial Systems was proud to work in conjunction with AC Marine in designing and supplying critical systems for Georgia Aquarium's newest venue to experience sharks directly with the grand opening of their 1.2MM gallon Shark Tank. This attraction allows you to submerge into the tank within a shark cage and begin an underwater journey traversing the pool as it is suspended and moved by a hoist/monorail system. Breathing air for the participants is supplied through an umbilical tethered to the cage and connected to a specialized Breathing Air Control System (BACS). Matrix supplied and installed this system with its umbilical as a turnkey project. Matrix and AC Marine were proud to be guinea pigs (or should I say SHARK BAIT) on the maiden voyage!
Site Map
Contact Info
112 Walter Jetton BlvdPaducah, KY 42001, United States
Website Design & Hosting by Arterburn.com
